您好,欢迎访问我们的官方网站,我们将竭诚为您服务!
        全国统一服务热线

        全国咨询热线:

        186-6468-9670

        联系我们

        CONTACT US

        广州市通骏机械设备有限公司

        联系人:余女士
        电 话:186-6468-9670
        邮 箱:3484255514@qq.com
        地 址:广州南沙区东涌镇大稳工业一街1-6号

        您的位置:主页  > 产品展示  > 所有点焊系列  > TMF系列中频逆变直流点凸焊机

        TMF系列中频逆变直流点凸焊机

        发布时间:2022-12-22 08:57人气:27

        TMF系列中频逆变直流点(凸)焊机

        TMF Series Medium Frequency Inverter DC Spot welding Machine

        特点及用途:

        1、通电时间短、热效率高、可有效抑制焊接飞溅、获得稳定高品质的焊接效果,焊接成型美观。

        2、控制精度高,中频点焊机由于工作频率高(通常在1-4KHz),使得反馈控制精度是一般交流点凸焊机和次级整流点凸焊机的20-80倍,相应的输出控制精度也非常高。

        3、逆变点焊机采用三相输入,宜于电网供电平衡,无须电力补偿设备,对电网无干扰。

        4、由于热效率高、焊接变压器小、铁损小,焊接同样的工件比交流点焊机和次级整流点焊机节能可达30%以上。

        5、特别适合于导电率较高的铜、铝和镀锌金属等材料,焊接效果良好,尤其适合于三层板焊接、非常薄的材料的焊接以及精密焊接的要求。

        Main Features:

        1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming

        2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.

        3.Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids

        4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%

        5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding

         

        主要技术参数 Main Technical Parameter

         

        参数/型号

        Parameter/model

        TMF-50KVA

        TMF-90KVA

        TMF-150KVA

        TMF-170KVA

        TMF-250KVA

        TMF-300KVA

        额定电源

        Rated/Voltage

        3相,交流电(AC),380------415-----480V,50/60HZ

        额定容量

        Rated/Capacity

        50KVA

        90KVA

        150KVA

        170KVA

        250KVA

        300KVA

        额定占截率

        Rated Duty Cycle

        50%

        50%

        50%

        50%

        50%

        50%

        最大焊接电流

        Max Welding Current

        18500A

        23500A

        32000A

        40500A

        56500A

        80000A

        电极行程

        Electrode Stroket

        75MM

        100MM

        电极臂间距

        Welding Arm Spacing

        260MM

        320MM

        气源压力

        Air Source Pressure

        0.6MPa

        冷却水流量

        Cooling Water Flow

        16L/Minute

        25L/Minute

        35L/Minute

        45L/Minute

        焊接实样Welding Samples

        在线客服
        服务热线

        服务热线

        186-6468-9670

        微信咨询
        广州市通骏机械设备有限公司
        返回顶部
        十分快3