产品详细
中频逆变直流点焊机
发布者: 发布日期:2018-10-20 16:43:47

TMF系列中频逆变直流点(凸)焊机
TMF Series Medium Frequency Inverter DC Spot welding Machine
特点及用途:
1、通电时间短、热效率高、可有效抑制焊接飞溅、获得稳定高品质的焊接效果,焊接成型美观。
2、控制精度高,中频点焊机由于工作频率高(通常在1-4KHz),使得反馈控制精度是一般交流点凸 焊机和次级整流点凸焊机的20-80倍,相应的输出控制精度也非常高。
3、逆变点焊机采用三相输入,宜于电网供电平衡,无须电力补偿设备,对电网无干扰。
4、由于热效率高、焊接变压器小、铁损小,焊接同样的工件比交流点焊机和次级整流点焊机节能可达30%以上。
5、特别适合于导电率较高的铜、铝和镀锌金属等材料,焊接效果良好,尤其适合于三层板焊接、非常薄的材料的焊接以及精密焊接的要求。
Main Features:
1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming
2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.
3.Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids
4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%
5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding
主要技术参数 Main Technical Parameter
想要了解更多关于自动闪光对焊机的信息,请点击:http://www.amadecasas.com
TMF Series Medium Frequency Inverter DC Spot welding Machine
特点及用途:
1、通电时间短、热效率高、可有效抑制焊接飞溅、获得稳定高品质的焊接效果,焊接成型美观。
2、控制精度高,中频点焊机由于工作频率高(通常在1-4KHz),使得反馈控制精度是一般交流点凸 焊机和次级整流点凸焊机的20-80倍,相应的输出控制精度也非常高。
3、逆变点焊机采用三相输入,宜于电网供电平衡,无须电力补偿设备,对电网无干扰。
4、由于热效率高、焊接变压器小、铁损小,焊接同样的工件比交流点焊机和次级整流点焊机节能可达30%以上。
5、特别适合于导电率较高的铜、铝和镀锌金属等材料,焊接效果良好,尤其适合于三层板焊接、非常薄的材料的焊接以及精密焊接的要求。
Main Features:
1.Current time is short, high thermal efficiency, which can effectively inhibit welding spatter, stability of high quality welding effect, beautiful welding forming
2.Control precision is high, intermediate frequency spot welding machine due to the high working frequency (usually in 1-4 KHZ), the feedback control precision is general ac point convex welder and secondary rectifier point convex welder 20-80 times, the corresponding output is also very high control precision.
3.Inverter spot welding machine adopts three-phase input, like the balance of power supply, no power compensation equipment, no interference of power grids
4.Energy saving: due to the high thermal efficiency, small welding transformer, welding inverter and small iron loss, welding the same artifacts, than ac spot welding machine and secondary rectifying spot welding machine and energy saving can reach more than 30%
5.Wide applicability: can welding materials such as copper, aluminum, and galvanized metal, welding effect is good.Three layer board is especially suitable for welding, welding material is very thin, and the requirements of precision welding
主要技术参数 Main Technical Parameter
参数/型号 Parameter/model |
TMF-50KVA | TMF-90KVA | TMF-150KVA | TMF-170KVA | TMF-250KVA | TMF-300KVA | ||
额定电源 Rated/Voltage |
3相,交流电(AC),380------415-----480V,50/60HZ | |||||||
额定容量 Rated/Capacity |
50KVA | 90KVA | 150KVA | 170KVA | 250KVA | 300KVA | ||
额定占截率 Rated Duty Cycle |
50% | 50% | 50% | 50% | 50% | 50% | ||
最大焊接电流 Max Welding Current |
18500A | 23500A | 32000A | 40500A | 56500A | 80000A | ||
电极行程 Electrode Stroket |
75MM | 100MM | ||||||
电极臂间距 Welding Arm Spacing |
260MM | 320MM | ||||||
气源压力 Air Source Pressure |
0.6MPa | |||||||
冷却水流量 Cooling Water Flow |
16L/Minute | 25L/Minute | 35L/Minute | 45L/Minute |
想要了解更多关于自动闪光对焊机的信息,请点击:http://www.amadecasas.com
推荐资讯
- 2019-03-21闪光对焊机为什么会应用如此广泛
- 2019-01-14自动闪光对焊机操作需注意的几大问题
- 2019-01-09中频点焊机生产厂家来探讨中频焊机的主要特点
- 2019-01-072D线材成型机操作前的需做好前期准备工作
- 2019-01-042D弯线机厂家:弯线机用途领域之广
- 2019-01-02中频点焊机生产厂家:电焊机检修三步曲
- 2018-12-28闪光对焊机生产厂家:如何有效的检测电焊机是否故障
- 2018-12-26闪光对焊机厂家,铁线2D成型机,2D线材折弯机
- 2018-12-24自动闪光对焊机:点焊机的使用注意事项须知探讨
- 2018-12-21自动闪光对焊机:点焊机用电安全大家注意了